大家都搜：
n.控制差错，调节误差；第误差
1、error sagree───错误sagree
2、smtp error───smtp错误
3、typing error───[计]打印错误，打字错误
4、refractive error───屈光不正；折射误差；[医]屈光不正
5、printer error───[计] 打印错误，印刷错误
6、convention error───约定错误
7、error───n.误差；错误；过失
8、control───v.指挥; 控制; 限定; 限制; 阻止蔓延; 抑制；n.统治; 控制（力）; 克制; 管理; 限制; 控制按钮; 检查站/人员; 对照标准；n.控制；管理；抑制；Cao纵装置；vt.控制；管理；抑制
9、license error───许可证错误
1、Analyze cost pererrorformance in production process and point out weakness in cost control error area.───分析生产过程的成本表现，并指出成本控制需改进的方面。
2、In addition, the impact of the shadowing, power control error and imperfect sectorization on the interference and system capacity are evaluated.───此外，该文还研究了阴影衰落、功率控制误差和非理想扇区天线这些实际因素对XiTong干扰与业务容量的影响。
3、Electrical control error analysis of concave spherical surface laser direct writing system───凹球面激光直写XiTong电控误差分析
4、In order to control error-rate, error-correction coding is made with permission of data rates.───同时为了控制误码率，在传输速度允许的情况下，可使用纠错技术。
5、APF then access points al0ng the harmonic current feedback, as a regulator input, adjusted feedforward control error.───再将有源滤波器接入点后的线上电流的谐波分量反馈回来，作为调节器的输入，调整前馈控制的误差。
6、In Chapter 25, we will discuss ways to improve control error handling.───在第25章中我们将讨论改善控件错误处理的方法。
7、law on coupling effect and gravity load impacting control error of the target simulator was studied.───耦合效应及重力负载影响目标模拟器控制误差的规律进行了对比研究。
8、Discussions are concentrated upon the algorismsof routing , flaw control , error recovery, and logical linkestablising .───着重讨论实现路径选择、流量控制、差错恢复、逻辑链路建立等算法。
1、The principle of trace control, error analysis and the software design which improves the quality of interpolation are described also.
2、During the seeking mark process, it makes use of the wireless data transmission feedback instead of the lineate feedback to avoid the system control error which brought by the line.
3、The algorithm of this pattern has recursive form and it is simple. It satisfies the uniformly small criterion of the control error, under certain proper conditions.
4、Based on the target′s phasing time analysis of orbit determination error, orbit control error and orbit prediction error, the strategy of the target′s phasing orbit maneuver was developed.
5、Based on the area control error (ACE) and frequency deviation, the total regulation power is corrected to be more suitable for CPS.
6、The repetitive controller based on the theory of internal model produces correction signal based on the control error of the last cycle to eliminate the error in the latter cycle.
7、The fuzzy algorithm keeps the form of rules and varies universe of discourse according to the control error.
8、In order to solve practical problems, we presented the methods such as dynamicwarrants, bitmap signature, transaction control, error information capturing and so on.