大家都搜：
填函料
1、packing density───组装密度，存储密度，记录密度；[电子]组装密度；[计]记录密度；[计]存储密度
2、packing───n.包装；填充物；v.包装；装满；压紧（pack的ing形式）
3、customary packing───[包装]习惯包装
4、packing fraction───聚集率；[核]敛集率
5、gland───密封压盖；n.腺
6、gland packing───压盖填料
7、insufficiently packing───包装不足
8、packing date───包装日期
9、packing label───包装标签
1、NOTE: If minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.───注：如果出现少量的泄漏，则拆卸锁紧螺丝，然后锁住垫圈和阀盖，然后轻轻紧固填料压紧螺母。
2、Check if the clamp-sealing torque of packing gland accords with the standard specification.───检验填函盖的钳紧扭矩是否符合标准规格。
3、Rugged construction provides years of reliable service. A two piece packing gland prevents cocking and stem damage.───坚固耐用的结构确保多年稳定可靠的使用。两件式填料压盖防止压盖翘起和阀杆损坏。
4、The smooth length of brass or steel rod that moves up and down through the stuffing box or packing gland of a sucker rod pump.───用于有杆泵的经盘根盒或盘根压盖上下移动的一根光滑的黄铜杆或钢杆。
5、The stem and packing gland are also stainless steel for corrosion protection.───阀杆和填料密封装置同样采用不锈钢，具有耐腐蚀性能。
6、packing gland is used to maintain compression on the packing rings.───填料压盖用来压紧填料环。
7、the installation of too much filler, so that packing gland packing in the above letter, resulting in displacement, abrasions stem.───填料安装太多，使填料压盖处在填料函上面，产生位移，擦伤阀杆。
8、Gland locking device prevents loosening of the packing gland, reducing leak potential.───压盖闭锁配置防止压盖松动，降低泄露可能性；
9、The packing gland is stainless steel for corrosion resistance. Packing gland bolts are easily accessible for adjustments.───填料密封装置采用耐腐蚀的不锈钢材质。填料密封装置的螺栓很容易BeiCao作，以便于调节。
1、Tighten up the packing gland on the swivel.
2、Stem and Disc or Disc Holder are integral. No packing gland, packing only in these sizes.
3、Properly press the packing gland bit wear and replace it in case of too much wear.
4、NOTE: If minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.
5、A two piece packing gland prevents cocking and stem damage.
6、The stem and packing gland are also stainless steel for corrosion protection.
7、No packing gland, packing only in these sizes.
8、Expeller seals packing include expeller , pressure - relief cover, sleeve, packing water sealing ring and packing gland, etc.
9、Check the stuffing box, the packing gland should be flatted and tensioning torque should be proper.