大家都搜：
n.钢铁公司股票；刀组；各种钢（steel的复数）
n. (Steels)（爱、英）斯蒂尔斯（人名）
1、brahmani steels───婆罗门钢
1、Specifications frequently state that capped steels may be used in certain fabrications.───规范经常表明，在某些制造中可以使用加盖钢。
2、The resulting steel appears to achieve a combination of strength and toughness that is comparable to that of modem steels that are very rich in alloy content and, therefore, very expensive.───产出的钢在强度和韧性方面的综合性能可与合金含量非常丰富的现代钢相媲美，因此价格非常昂贵。
3、The persistent slip bands were determined by the observations of the substructure near the surface of gear steels on fatigue load.───通过对在疲劳载荷作用下渗碳齿轮钢次表层亚结构的观察发现有持续滑移带形成。
4、HIGH STRENGTH STEELS FOR CIVIL ENGINEERING WORKS. ASSESSMENT OF THE EMBRITTLING EFFECT OF A MEDIUM BY MEANS OF SLOW TENSILE TESTING.───建筑工程用高强度钢.在缓张力试验条件下对介质脆化效应的评定
5、In modern steels they shouldn't break at all, but if they do it will be where the steel is thin and most easily bent, near the point.───现代钢做的刀很难断掉，如果断了，肯定是最薄最容易弯曲的地方，靠近刀尖。
6、If we focus only on the materials normally known as steels, a simplified diagram is often used.───如果只把注意力集中于一般所说的钢上，经常要用到简化铁碳状态图。
7、EN ISO 287-1 Qualification Test of Welders-Fusion Welding-Part 1: steels.───EN ISO 287 - 1焊工资质测试—熔焊—第一部分：钢材。
8、She can play with her friends, steels the oranges in the garden, and communicates with the little animals.───她可以与自己的朋友一起玩耍，偷摘果园的橘子，和小动物们打交道。
9、Low-carbon steel is often used as constructional steel, and low-carbon and medium-carbon steels are often used as machinery steel.───低碳钢常用作建筑用钢，机械用钢一般是低碳钢和中碳钢。
1、In this paper, the carbon steels containing 0. 15%, 0. 45% carbon had been treated by an advanced carbonitriding process, named three-gases and two-steps process.
2、Ltd... The steels poured involved plain carbon steel, hard string steel and steel holding little alloy.
3、Fwelding of important carbon steels certain low-alloy steels coordination with HJ431.
4、Carbon steels exist in three stable crystalline phases.
5、Please insert the main supporting steels into the fuselage and tighten the screws.
6、Hydrogen embrittlement can become important in martensitic steels.
7、The cavitation erosion regularity of five steels of different heat treatments was studied using rotating disc testing equipment.
8、This treatment is particularly useful for hypereutectoid steels that must be machined.
9、Structural steels can be subdivided into constructional steel and machinery steel.