大家都搜：
激活温度
1、constant temperature───[热]恒温；定温；等温；等温，恒温
2、license activation───许可证激活
3、temperature───n.温度；体温；气温；发烧
4、transcriptional activation───转录激活
5、activation energyserum───活化能谱
6、temperature rise───[电]温升；温度上升；温度上升，温升，升温
7、enhancer activation───增强子激活
8、critical temperature───[物][电子]临界温度；n.临界温度
9、temperature outside───室外温度
1、Relationship between Activation Temperature of Dry Yeast and Fruit Wine Quality───干酵母活化温度与果酒品质的关系
2、Experimental Study on the Activation Temperature and Sorption Characteristics of the New Nonevaporable Getter Material───新型非蒸散消气剂的激活温度和吸气性能的实验研究
3、A lot reaction factors, involving activation temperature, activation time, reaction temperature, reaction time, the amount of solvent, were investigated in detail.───详细地考察了活化温度和活化时间以及反应温度和反应时间、溶剂用量对烯丙基醚化反应的影响。
4、The activation temperature of several typical fluxes and the influence on temperature profiles───几种典型的助焊剂活化温度以及对温度曲线的影响
5、principles of effect of system pressure, activation temperature and content of fluorine were obtained by the phase diagrams.───通过相图讨论了XiTong压力、激活温度和氟含量对低压金刚石薄膜淀积条件的影响，可以为实验研究提供理论指导。
6、Effect of activation temperature on structure and adsorptivity of polyacrylonitrile-based activated carbon hollow fiber───活化温度对聚丙烯腈基活性中空炭纤维结构和吸附性能的影响
7、thermal activation of coal gangue has the optimum activation temperature when keeping the same fineness;───保持细度相同的情况下，对于煤矸石的热力活化存在最佳活化温度；
8、Effects of activation temperature, temperature holding time and activation agent ratio on the structure of adsorbents were investigated.───实验考察了活化剂用量、活化温度和活化时间对吸附剂结构参数的影响。
9、The Influence of Activation Temperature on Structure and Desulfurization Performance of Honeycomb-like Activated Carbon───活化温度对蜂窝状活性炭结构和脱硫性能的影响
1、And proceeded the research to a series of influence factor in activate process, such as the activation time, activation temperature the concentration of calcium carbonate and the dose of activators.
2、Effects of the activating reagent amount, activation temperature and activation time on the capacitance characteristic of activated carbon were studied.
3、The results show that the influence of the conditions on BWC follows the sequence: activation temperature, amount of additive and activation time.