大家都搜：
绝缘层
隔离层
1、dense layer───[医]致密层
2、outer layer───外层（细胞次生壁外面的一层）
3、isolation ward───n.隔离病房
4、alkaloids isolation───生物碱分离
5、isolation forest───隔离林
6、splendid isolation───光荣的孤立（以前的英国外交政策，表示不卷入欧洲政治旋涡）；光辉孤立
7、isolation valve───[机]隔离阀；[化] 隔离阀
8、isolation───n.隔离；孤立；[电]绝缘；[化学]离析
9、layer───vt.把…分层堆放；借助压条法；生根繁殖；将（头发）剪成不同层次；n.层，层次；膜；[植]压条；放置者，计划者；vi.形成或分成层次；[植]通过压条法而生根
1、The coupled heat transfer in the air cooling channel and thermal isolation layer of an aeroengine is investigated numerically.───数值研究了某飞机发动机外侧冷气道与隔热层的耦合传热过程。
2、B Review condenser pick-cylinder size, puts up the scaffolding, check the condenser bundle isolation layer to protect intact or not.───B复查凝汽器接缸尺寸，搭设脚手架、检查凝汽器管束保护隔离层完好与否。
3、After pouring isolation layer (Ballard handling) drum and then really copperizing and electroforming as defined by the form.───不纬浇注分隔层（巴拉德办理）的滚筒再镀铜的历程本质上与电铸所界说的步地不同。
4、turbulent convection and wall radiation in channel and the thermal conduction in isolation layer are solved simultaneously.───通道内气流湍流对流换热、壁面间辐射换热与隔热层内导热耦合求解。
5、Setting isolation layer is a new technology between superstructure and substructure of project, which can reduce earthquake damage.───在工程的上部结构与下部结构之间设置隔震层是减轻工程结构地震PoHuai的新技术。
6、The seal (5) is torn for usage, then pushing and pressing along the arrow head direction (6) by hand, to break up the isolation layer (3).───使用时撕开封条（5），以手动方式从外部沿箭头方向（6）推压，造成隔离层（3）破裂。
7、Isolated seismic response depends mainly on the stiffness of isolation layer and the elastic-plastic properties.───隔震结构的地震反应主要取决于隔震层的刚度和弹塑性性能。
8、But for the different positions of isolation layer, the damping effect of the structures also differ very obviously.───但因为隔震层位置的改变，结构的减震效果也产生了很大的变化。
1、Base-isolation structure sets up the isolation layer which generates a larger deformation. Base-isolation structure's vibration period has increased and seismic response of superstructure has reduced.
2、Walnut sticks intradermal more tannin, easy to form an isolation layer interface.
3、Single shell lining is a reflection of the mechanical concept, namely, the lining without isolation layer which can well bare the external applied load together.
4、For devices formed on an oxide isolation layer, the poly- filled trench desirably penetrates this isolation layer thereby improving thermal conduction from the active regions to the substrate.
5、Variation wave (VW) could not be transmitted to stock from scion before isolation layer broken and callus interdigitation.
6、The seal (5) is torn for usage, then pushing and pressing along the arrow head direction (6) by hand, to break up the isolation layer (3).