大家都搜：
[航][船]螺旋桨叶片
1、propeller───n.[航][船]螺旋桨；推进器
2、safety blade───安全刀片
3、fillet blade───圆角叶片
4、breaker blade───PoSuiJi叶片
5、cycloidal propeller───摆线型螺旋桨
6、blade───n.叶片；刀片，刀锋；剑
7、conquerors blade───征服者之刃
8、propeller plane───螺旋桨飞机；螺旋桨平面
9、super blade───超级刀片
1、The propeller blade is powered by a diesel engine.───螺旋桨叶由柴油发动机驱动。
2、The effects of grinding parameters on surface roughness of marine propeller blade were studied by using orthogonal test.───通过正交试验研究了磨削参数对船用螺旋桨叶片表面粗糙度的影响。
3、When the machining of the propeller blade was finished, the machining surface was measured and the measure-data was gathered automatically.───螺旋桨叶片在线质量评估是对加工完之后的工件进行在线测量，根据测量数据评估其质量。
4、Study of the Optimum Angle of Attack for the Propeller Blade───关于螺旋桨桨叶有利迎角的探讨
5、The propeller blade has been mounted.───推进器的叶片已经安装好了。
6、By using an objective curve and several propeller blade-angles, 10 flight states of aircraft are simulated.───用一条目标曲线，几个螺旋桨桨叶角，模拟了飞机的10个飞行状态。
7、wing, tail, or propeller blade, that produces lift and drag when moved through the air.───在空气中运动时能产生升力和阻力的型面，如机翼、尾翼或螺旋桨桨叶。
8、Followed by the propeller blade element theory to calculate the relevant motion parameters correction and booking parameters.───接着是应用叶素理论对螺旋桨相关活动参数停止计较并对预订参数停止批改。
9、By the machining process planning, the machining working procedure of propeller blade is come true.───按照大型舰船用螺旋桨的数控加工工艺要求，制定了叶片的加工工序。
1、Four feet of propeller blade snapped off, investigators said, and the engine cowling began to disintegrate.
2、Examination of the Mossie revealed a mark on a propeller blade that looked like a bird strike.
3、The optimum distribution of circulation on a marine propeller blade is numerically determined by using the lift_line vortex model and variational calculus.