大家都搜:
自动对准
1、alignment test───精度检查
2、jaw alignment───钳口对齐
3、text alignment───n.文字对齐;文本对齐
4、wheel alignment───n.前轮定位;前轮校正;n.前轮定位,前轮校正
5、automatic knives───自动刀片
6、automatic bomb───自动ZhaDan
7、automatic───n.自动机械;自动ShouQiang;adj.自动的;无意识的;必然的
8、alignment───n.队列,成直线;校准;结盟
9、alignment definition───路线定义
1、Automatic Alignment Method and Its Applications in Image Inspection───图像检测中自动对准方法及应用
2、The automatic alignment of the resonators is one of the critical techniques in realizing high-power laser automatic system.───谐振腔的自动准直调整技术是实现高能激光器XiTong自动化的关键技术之一。
3、A Study of Feature Points Extraction for High Precision Automatic Alignment System───高精度自动对准XiTongZhongTe征点提取方法的研究
4、Automatic alignment technique on the basis of machine vision is one of the most important techniques in the check and sorting of LED chip.───基于机器视觉的自动定位是LED芯片检测和分选中的一项重要技术。
5、The final step, an optical automatic alignment system is completed by using the optical imaging system.───最后,利用上述光学成像技术,实现了一种光学自动对准XiTong。
6、This paper studied the program automatic alignment algorithm for batch production.───研究了批量产品参考标架的程序自动化校准算法。
7、Automatic alignment of object is often needed in the application of vision measurement technology.───视觉测量技术应用中经常需要测量目标的自动对准。
8、Image processing is one of the key techniques in laser beam automatic alignment.───图像处理是光路自动准直的关键技术之一。
9、The several partial views of automatic alignment is realized by Atos with the sensor-calibration and fixed reference points.───该设备利用XiTong标定和固定参考点来实现多幅图像的拼合对齐,以完成整个工件的扫描测量工作。
1、Automatic alignment of parallel corpora is an important research subject in natural language processing area.
2、Usage: special equipment for auto starting motor armature flat wire coil automatic wire loading, automatic wire feeding, automatic alignment, automatic cutting off and automatic shape making.
3、Based on complex principal component analysis (PCA), a method for automatic alignment of damping factor in magnetic resonance spectroscopy is presented.
4、Usage: special equipment for auto starting motor armature round coil automatic wire loading, automatic wire feeding, automatic alignment, automatic cutting off and automatic shape making.
5、The attitude angle(or angular rate) data of INS were often ignored during study and application of automatic alignment technique.