大家都搜：
[机]挤压比
1、extrusion thermoforming───挤压热成型
2、extrusion reflex───挤压反射
3、extrusion online───挤出联机
4、extrusion companies───挤压公司
5、variation ratio───异众比率；变异比率；变速比，变速范围
6、ratio───n.比率，比例
7、click ratio───点击率
8、joggled extrusion───点动挤压
9、extrusion gis───挤压地理信息XiTong
1、So fine aluminum conductor wire can be produced by the proposed process and under proper extrusion ratio.───采用合理的挤压比，可直接生产性能良好的铝合金导电线材。
2、Fig. 9 illustrates the limitations of the extrusion ratio with respect to the other four process parameters.───表9说明了在其他四个加工参数下的挤压比的限制性。
3、So fine aluminum conductor wire can be produced by the proposed process and under proper extrusion ratio.───合理的挤压比，可直接生产性能良好的铝合金导电线材。
4、Increasing of extrusion ratio was beneficial to the improvement of mechanical properties of composites.───提高挤压比，有利于复合材料性能的提高。
5、the relationship curves between the extrusion speeds and extrusion force for different extrusion ratio are obtained.───分析了挤压力随挤压速度及挤压比的变化规律。
6、As observed before, since the wheel velocity does not affect the defect occurrence, the limiting extrusion ratio is not affected by it.───正如之前观察得知，由于转轮速度并不影响缺陷发生，所以限制挤压比也不会受到影响。
7、The hot extrusion of magnesium alloy sheet under high extrusion ratio is investigated.───探讨高挤制比之镁合金板材热间挤制加工。
8、With the increasing of extrusion ratio, both tensile strength and extensibility are improved.───随着挤压比的增加，抗拉强度和伸长率提高。
9、The corrosion rate and degree is decreased with increased extrusion ratio and decreased chips size.───随着挤压比的增大，屑粒尺寸的减小，腐蚀程度减轻，腐蚀速率呈递减趋势。
1、The author proposes a local extrusion ratio method to determine the location of extrusion die hole.
2、The stress and temperature effect increase with increasing extrusion ratio and ram speed.