大家都搜：
停止按钮；制动按钮；停车按钮
1、collar button───（美）领扣
2、button button───按钮
3、stop───vi.停止；中止；逗留；被塞住；n.停止；车站；障碍；逗留；vt.停止；堵塞；断绝
4、hold button───[计]保持按钮；守候电话按钮；保持键
5、panic button───应急按钮；[电]应急开关；紧急保险按钮
6、brass button───n.铜钮扣
7、stop stop stop───停，停，停
8、stop by stop───一站一站
9、button batteries───扣式电池
1、A remote client disconnect is usually caused by the user hitting his STOP button .───远程客户端连接的中断通常是由用户点击STOP按钮导致的。
2、After you have moved through all the tasks, click the red stop button to exit the storyboard.───在您移动通过所有任务之后，单击红色的停止按钮以退出故事板。
3、Click the application link next to the stop button.───单击stop按钮旁边的application链接。
4、One alarm buzzer with stop button for power failure alarm on the relay box is to be provided.───在继电器箱上应设有一个带消音按钮的蜂鸣器，用于电源故障报警。
5、the braking device is formed by a caliper and a stop button arranged on the top cap.───制动装置是由制动钳和安装在顶盖上的制动按钮构成的；
6、EMERGENCY STOP the EMERGENCY STOP button is red and is located in the lower left corner of the control panel.───停止紧急停止按钮，紧急情况是红色，并在较低的控制面板位于左上角。
7、Click the stop button to stop the execution, as shown in Figure 32.───点击Stop按钮以停止执行，如图32所示。
8、The lift then began to fall faster and faster until someone hit the emergency stop button.───随后电梯开始向下坠，越来越快，直到有人压下紧急制动按纽。
9、Its hind legs and feet, but gave a stop button, and then got out of the car, shopping is in its mouth.───它后腿蹬地，用前爪按了一下停车按钮，然后下了车，买的东西还叼在它的嘴上。
1、The machine operates by a Start/Stop button, so constant use of a foot controller is not necessary.
2、Record the range of the fund . fred: Click the STOP button stop monitoring data.
3、Safety Devices Full safety cover for noise - suppression and dust - proofing . Emergency stop button.
4、If nothing has happened after ten seconds or so, your impatient correspondent hits the browser's stop button followed by the reload key.
5、Stop the VI by pressing the STOP button on the front panel. If you are in single-step mode, keep pressing the step button until it completes.
6、Press the stop button and the machine stops at loop termination. But if long time stop is necessary, the following steps are required.
7、Note: You may exit the configuration mode without making changes by pressing the STOP button repeatedly until the initial bootstrap loader message reappears on the LCD screen.
8、Just press the stop button to stop at loop termination and temporary stop will achieve.
9、Press the stop button again to eject the tape.