大家都搜：
[机]法兰螺栓；凸缘螺栓
1、mounting flange───定位凸缘；[机]安装用法兰；支承法兰；固定法兰
2、bolt flange───螺栓法兰
3、blind flange───盲板；堵塞法兰；盖板; 闷头法兰
4、bolt───vi.（门窗等）闩上，拴住；冲出，跳出；（马等的）脱缰；囫囵吞下；vt.筛选；囫囵吞下；（把门、窗等）闩上；突然说出，脱口说出；n.螺栓，螺钉；闪电，雷电；门闩；弩箭;（布的）一匹，一卷；adv.突然地；像箭似地；直立地
5、flange───n.[机]法兰；[机][古生]凸缘；轮缘；边缘；vt.给…装凸缘
6、flange plumbing───法兰管道
7、flange dots───凸缘圆点
8、flange tool───法兰杆
9、flange bolts───突缘螺丝
1、In this paper presents optimum design of flange bolt connection with constraint of strength reliability.───本文以强度可靠度为约束，对法兰螺栓联接进行了优化设计。
2、Valves can also be furnished with flange bolt holes drilled for through bolting, except in the chest area.───阀门也可以配置法兰螺栓孔，用于贯穿式螺栓，但不能穿过阀腔区域。
3、As a general rule, piping flanges should be concentric to pump nozzles to within the flange bolt hole clearance tolerance.───管路法兰与泵口要同心，偏差不能超过法兰螺栓孔尺寸公差。
4、When a bolt is not to play in a large flange bolt hole welding place.───在打螺栓孔的时候是不可以把螺栓孔打在有大型法兰焊口的地方的。
5、Note: 1. Size - Nominal diameter of the valve; D1 - Diameter of the flange bolt hole center circle; D - Diameter of the flange bolt holes.───注：1。规格尺寸为阀门通径尺寸；D1为阀门法兰孔中心分布圆尺寸；D为法兰孔直径。
6、Leak through diaphragm or around flange bolt holes of relief valve───隔膜或环绕安全阀法兰螺栓孔泄漏
7、Draw the flange bolt holes across the center line with a ruler, assemble───用直尺划出法兰螺栓孔跨ZhongXian，与筒体纵缝线平行组装。
8、Stainless steel, aluminum. Under the operating condition of deep cooling, the materials of ring and flange bolt are the same.───不锈钢、铝。深冷工况下，环与法兰螺栓同材料。