大家都搜：
均匀应力
均布应力
1、cuirassier uniform───胸甲制服
2、alternating stress mean stress───交变应力平均应力
3、new uniform───新制服
4、dress uniform───军礼服
5、shear stress───[力]剪应力；[力]剪切应力；剪应力; 切变应力; 切应力; 粘性摩擦应力
6、smart uniform───漂亮的制服
7、uniform───vt.使穿制服；使成一样；n.制服；adj.统一的；一致的；相同的；均衡的；始终如一的
8、stress───n.压力；强调；紧张；重要性；重读；vt.强调；使紧张；加压力于；用重音读；n.(Stress)人名；(意)斯特雷斯
9、in uniform───穿制服
1、Tentative Idea and Realization of Uniform Stress Tendons───等应力束技术的设想与实现
2、Also, due to the close contact between the rollers and raceways , uniform stress distribution is achieved in the bearing.───此外，由于之间的密切接触的滚子和滚，统一的应力分布是中取得的轴承。
3、Utilizing the uniform stress model, the shape with the most uniform stress meet the surface precision requirement is gained.───建立了均匀应力分布模型，在满足形面精度要求条件下，获得了应力相对均匀的几何构形。
4、The analysis shows that the lower friction coefficient, the more uniform stress distribution;───分析表明，摩擦系数越小，吊绳的应力分布越均匀；
5、Eq. (1) can be regarded as the equation for the uniform stress in a prismatic bar.───方程1可以被认为是柱形杆平均应力的方程式。
6、The results show that there is a near uniform stress state in the shear zone.───结果表明，双剪切试样受剪区域的应力状态基本为均匀分布且随蠕变时间变化很小。
7、Toward paraboloid shape demand of inflatable membrane structure after inflation, the ideal shape model and the uniform stress distribution model are established.───针对充气膜结构反射面充气后的高精度抛物面形状要求，建立了理想状态形状模型和均匀应力分布模型。
8、influence of shearing deformation causes the non-uniform stress in the wing plate of the box girder, especially the cantilever box girder.───剪切变形的影响使得箱形梁的翼板中出现应力不均匀现象，尤其是悬臂箱形梁剪力滞现象。
9、The non - uniform stress distribution makes it difficult to fabricate the same apex height of parallel arch- like beams.───然由于制程上的误差和不均匀的残留应力，使得平行拱形结构之顶点翘曲的程度不一；