大家都搜：
v.渗碳于（carburize的ing形式）
n.[材]渗碳
1、carburizing mild steel───渗碳软钢
2、carburizing h13───渗碳h13
3、carburizing a36───渗碳a36
4、carburizing gas───气体渗碳剂；渗碳气体
5、carburizing a2───渗碳a2
6、carburizing pdf───渗碳pdf
7、carburizing diy───渗碳diy
8、carburizing hrc───渗碳hrc
1、Low temperature plasma carburizing is an effective process of improving mechanical property of austenitic stainless steel.───低温离子渗碳处理是一种能改善奥氏体不锈钢表面力学性能的有效方法。
2、Carry out a research into the application of bipolar thyristor to the carburizing furnace control system.───对双向晶闸管在渗碳炉控制XiTong中的应用进行了研究。
3、CYCLE TIME : Amount of time product spends in a furnace at specified temperature for the purpose of carburizing or hardening product.───周期：产品在炉中某特定温度下渗碳或硬化所需要的时间。
4、The gear reducer for high strength steel carburizing carburizing hardening low noise transmission.───减速器的轮为高强度渗碳钢，经渗碳淬火处理，传动噪音低。
5、The main production of solid carburizing agent.───主要生产固体渗碳剂。
6、The feature of the microstructure of the silicon- aluminizing coating and its anti-carburizing property were analyzed and studied.───分析了铝硅共渗层的组织特点，研究了处理层的抗渗碳性能。
7、treatment: vacuum, carburizing, nitriding, vacuum heat treatment and cryogenic treatment etc.───热处理：真空，渗碳，渗氮，真空热处理，超低温处理等。
8、The amount and the depth of carburizing on the casting surface can be obtained approximately by a calculating formula.───给出了铸件表面增碳大小及增碳层深度的近似计算公式。
9、Steel for carburizing is usually a low-carbon steel of about 0. 15% carbon that would not in itself responds appreciably to heat treatment.───用于渗碳的一般是含碳量约为0.15%、本身不太适合热处理的低碳钢。
1、Carburizing, cyaniding , and induction hardening are some of the processes commonly used to produce the case hardening effect.
2、To know heat treatment of vacuum, carbonnitriding, carburizing and protected quenching etc.
3、The main production of solid carburizing agent.
4、Nonsymmetrical carburizing may also contribute to distortion.
5、Steel for carburizing is usually a low-carbon steel of about 0.15% carbon that would not in itself responds appreciably to heat treatment.
6、The carburizing process of steel 20 with and without RE addition was investigated.
7、As a raw gas for carburizing, it is necessary to desulphurize in the gas sufficiently.
8、Abstract: The carburizing process of steel 20 with and without RE addition was investigated.
9、It can be considered a multi stage carburizing.