大家都搜：
[力]轴向推力
1、thrust───n.推力；刺；要旨，重点；强攻；冲断层，逆断层；苛评；v.插；ChaRu；推挤；ChaRu；用向某人刺去；猛然或用力推；伸展；强使接受；竖起，挺出
2、axial fan───轴流式风机，轴流式通风机；[机]轴流式通风机；[机]轴流式风扇；轴两扇风机
3、axial───adj.轴的；轴向的；n.(Axial)人名；(法)阿克西亚尔
4、thrust capacity───轴向负荷支承能力
5、axial spondyloarthritis───可考虑中轴型脊柱炎
6、thrust to───推力
7、axial force───轴线力，轴向力
8、thrust upon───强加于
9、axial age───轴心时代；轴心世纪
1、The tapered roller bearing replaces axial thrust ball bearing.───采用圆锥滚子轴承取代现有的轴向推力球轴承。
2、With an additional axial thrust bearing, both the thrust and radial bearings are preloaded individually.───由于增加了一套轴向止推轴承，所有的推力和向心轴承均被分别预加载。
3、variation laws of axial thrust with flow rate are found.───得到了轴向力随流量变化的规律。
4、Moreover, a gear pair with curvilinear - tooth traces operates without axial thrust force.───除此之外，具有曲线型齿线之齿轮在运转时亦不会产生轴向的推力。
5、Repelling vanes shall be provided on the top shroud to expel solids and reduce axial thrust and pressure at the seal area.───在泵顶部应该配置排斥叶片，用于排出固体颗粒，减少轴向推力和密封区域的压力。
6、Using of impulse section blade ensured its flow capacity with the axial thrust almost unchanged.───在保持轴向推力几乎不变的情况下，选用冲动式叶片保证了叶片有较好的通流能力。
7、as the length of sidewall increases, axial thrust coefficient improves slightly.───随着喷管侧壁长度的增加，轴向推力系数可略微提高；
8、The MSH range is designed for high pressure applications and the axial thrust is balanced by the combination of the drum and disc.───MSH系列产品作为针对高压应用的设计，轴向推力通过平衡室XiTong和圆盘一起进行平衡。
9、Metrical experimental studies on screw torque, axial thrust, barrel inwall pressure of twin screw pulping extruder (TSPE) were done.───对双螺杆磨浆机的螺杆扭矩、轴向推力和机筒压力进行了测量实验研究。
1、Balance arrangment of the two impeller is adopted, So axial thrust on the impeller because minimus.
2、Moreover, a gear pair with curvilinear - tooth traces operates without axial thrust force.
3、Screw propeller theory is then used to calculate the axial thrust and to analyze factors that influence the thrust.
4、This research dealt with the axial thrust and the wearability of graphite bearing of a vertical canned motor pump, which are the two critical problems about the pump's working life.