大家都搜：
n.曲轴；机轴
1、crankshaft bearing cao───曲轴轴承cao
2、crankshaft sprocket───n.曲轴链轮；轴承链轮；曲轴正时炼轮
1、In this paper the dynamic optimum design was carried out for the crankshaft of a horizontal reciprocating emulsion pump with three pistons.───本文对矿用卧式三柱塞往复乳化液泵曲轴进行了动态优化设计研究。
2、Fit chain drive sprocket on the crankshaft.───链条驱动链轮安装到曲轴上。
3、For the secondary forces to be in balance, the rods connecting the pistons to the crankshaft would have to be of infinite length.───为了平衡不受控制的力，连接活塞和机轴的杆不得不变得无限加长。
4、A system to reduce rotational speed variations of a crankshaft includes a controller, a braking device, and a control module.───一种减小曲轴转速变动的XiTong，包括KongZhiQi、制动装置和控制模块。
5、And with custom-machined heads, custom camshafts and a billet crankshaft, it's hard to argue you're not getting your money's worth.───与定制加工元首，自定义凸轮轴和曲轴坯，很难说你没有得到你的钱值得。
6、A crank arm is the offset portion of a crankshaft to which connecting rod and position are attached.───曲柄臂是曲轴连接臂，其中安装连杠和活塞。
7、Remove chain drive wheel from crankshaft.───从曲轴上拆下链条驱动轮。
8、The engine had a broken crankshaft.───发动机的曲轴断了。
9、Grinding as the crankshaft finishing processes, the location of the crankshaft, the surface roughness and the Beat has a great impact.───磨削作为曲轴精加工的工序，对曲轴的尺寸精度、形位精度、表面粗糙度和跳动都有极大的影响。
1、The camshaft rotates in phase with the crankshaft, but at half its speed.