大家都搜：
比例限界
1、framerate limit───帧速率限制
2、gas limit───气体极限
3、limit───vt.限制；限定；n.限制；限度；界线
4、proportional valve───比例阀；定量阀；流量阀；配合阀；比例阀，定量阀，配合阀
5、proportional reasoning───比例推理
6、proportional definition───比例定义
7、proportional relationships───比例关系
8、proportional───n.[数]比例项；adj.比例的，成比例的；相称的，均衡的
9、proportional equations───比例方程
1、Calculation of proportional limit load for soft clay foundation involving the effect of dry crust───考虑硬壳层作用的软土地基临塑荷载计算
2、The tensile modulus approximately equal to the compressive modulus of elasticity within the proportional limit.───拉伸载荷模量约等于比例极限内的弹性模量。
3、the theoreitical analysis, the effective modulus E was used for the stresses which exceed the proportional limit.───应力超过比例极限后，采用了有效模量值。
4、low proportional limit may be explained by localized plastic deformation under low macroscopic stress caused by stress concentrations at the ends of SiC whiskers.───复合材料低的比例极限可由晶须端部应力集中所导致的低应力局部塑性变形来解释。
1、It was showed that the lower elastic modular of rigid concrete, the higher proportional limit and peak strain.
2、When the stress exceeds the elastic limit (or proportional limit for practical purposes), it is found that a portion of the deformation remains after the load is removed.
3、The tensile modulus approximately equal to the compressive modulus of elasticity within the proportional limit.
4、In the theoreitical analysis, the effective modulus E was used for the stresses which exceed the proportional limit.
5、The low proportional limit may be explained by localized plastic deformation under low macroscopic stress caused by stress concentrations at the ends of SiC whiskers.