大家都搜：
[物]参考温度；[物]基准温度
1、reference───vt.引用；vi.引用；n.参考，参照；涉及，提及；参考书目；介绍信；证明书
2、constant temperature───[热]恒温；定温；等温；等温，恒温
3、temperature rise───[电]温升；温度上升；温度上升，温升，升温
4、critical temperature───[物][电子]临界温度；n.临界温度
5、reference standard───[经管]参考标准
6、fluctuating temperature───波动温度；脉动温度；脉动温度，波动温度
7、temperature outside───室外温度
8、temperature───n.温度；体温；气温；发烧
9、low temperature───低温，低温度；[物]低温
1、C. atomized water is supplied when working temperature is equal to or higher than the reference temperature value, ;───工作温度等于或高于温度基准值时，即供应 雾化水；
2、C. atomized water is supplied when working temperature is equal to or higher than the reference temperature value, ;───在工作温度等于或高于温度基准值时，即供应雾化水；
3、Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature───以冰点槽浴作为标准温度的准备和使用标准惯例
4、Near Surface Reference Temperature?───近表面参考温度NSRT ？
5、In multi-channel systems the reference temperature is based on a single reference measurement,───在一个多点热电偶XiTong中，基准温度是基于一个单一测量值，
6、Standard Test Method for Determination of Reference Temperature, To', for Ferritic Steels in the Transition Range───测定铁素体钢在转变范围内基准温度的标准试验方法
7、The choice of the reference temperature is inconsequential.───基准温度的选择是无关紧要的。
8、Petroleum measurement tables; part 2: tables based on a reference temperature of 20 C───石油测量数值表.第2部分：根据参比温度20℃编制的表
1、The choice of the reference temperature is inconsequential.
2、The thermodynamic function data relative to the reference temperature(298.15 K) were calculated based on the heat capacities measurements in the temperature range from 80 K to 325 K.
3、Type of circuit Breaker, pole number, rated current of tripping device, reference temperature of ambient air mode of connection, kind of accessories and their working voltage ratings.
4、This reference temperature is determined from the cold junction reference ( CJR ).
5、The DMM uses this simulated reference temperature in calculating the temperature at the thermocouple.
6、The mid - resolution a conical scanning total power radiometer a fixed visual angle and double - reference temperature.
7、This temperature reading is used by the instrument as the reference temperature for subsequent thermocouple measurements.