大家都搜：
[材]晶间腐蚀；粒间腐蚀
1、neutralize corrosion───中和腐蚀
2、corrosion protection───[材]防腐；防腐蚀，腐蚀保护
3、corrosion suede───防腐麂皮
4、formicary corrosion───蚁蚀
5、fretting corrosion───摩擦磨蚀；接触腐蚀；接触腐蚀，摩擦腐蚀; 磨蚀
6、bisulfide corrosion───二硫化氢腐蚀
7、corrosion───n.腐蚀；腐蚀产生的物质；衰败
8、corrosion resistant───耐腐蚀的，抗腐蚀
9、corrosion science───[化学]腐蚀科学
1、Breakage mechanism of these pipes is tipping corrosion, accompanied with intergranular corrosion and stress corrosion cracking.───腐蚀机理一般为点蚀，往往伴随晶间腐蚀和应力腐蚀。
2、behavior of 2d12 alloy was evaluated including intergranular corrosion, exfoliation and stress corrosion cracking.───2d 12铝合金进行晶间腐蚀、剥蚀和应力腐蚀性能测定。
3、Detections of susceptibility to intergranular corrosion in stainless steel and nickel alloy pressure vessels are always gone on before now.───此前不锈钢与镍合金压力容器晶间腐蚀敏感性检验原本就在进行着。
4、The quench sensitivity relative to intergranular corrosion increased with the increase of rolling deformation.───随着轧制变形量的增大，合金晶间腐蚀的淬火敏感性增大。
5、EXAMINATION RECORD FOR INTERGRANULAR CORROSION, HARDNESS, METALLOGRAPHY, FILLET WELD AND WELD CHEMICAL COMPOSITIONS. . . . . .───晶间腐蚀，硬度，金相，角焊缝，焊缝化学成份检验记录表
6、The corrosion types of the cast and extruded alloys are pitting corrosion and filiform corrosion as well as intergranular corrosion.───铸态和挤压态镁钙合金主要腐蚀形态为点蚀、丝状腐蚀和晶间腐蚀。
7、reason of intergranular corrosion and exfoliation corrosion is analyzed.───分析了发生晶间腐蚀和剥蚀的原因。
8、The wall of the pipes is becoming thinner and thinner as intergranular corrosion occurred under the incrustation.───水垢下面的管内壁产生晶间腐蚀而减薄。
9、corrosion of poor Cu area is the root of intergranular corrosion.───贫铜区受到腐蚀是晶间腐蚀的根源。
1、The corrosion behavior of 2 D 12 alloy was evaluated including intergranular corrosion, exfoliation and stress corrosion cracking.
2、The corrosion types of the cast and extruded alloys are pitting corrosion and filiform corrosion as well as intergranular corrosion.
3、Moreover, intergranular corrosion on the serration surface is other reason to induce GH2036 turbine disc to early fail under the high-temperature combustion condition.
4、The corrosion forms include pitting corrosion, intergranular corrosion, abrasive corrosion - erosion, galvanic corrosion and crevice corrosion.
5、Breakage mechanism of these pipes is tipping corrosion, accompanied with intergranular corrosion and stress corrosion cracking.
6、Effect of pre-deformation and quenching agent on intergranular corrosion resistance of high strength aluminum alloy was investigated in this paper.
7、The wall of the pipes thinner and thinner as intergranular corrosion occurred under the incrustation.
8、Intergranular corrosion of heat-affected zone was improved.
9、Austenite-type stainless steel acid-resistant major defects are prone to intergranular corrosion of steel in general can be taken to impose certain measures to prevent heat-treated.