大家都搜：
[机]拉杆；推杆
1、push pull───推挽的；推挽式
2、pull apbus───拉动apbus
3、stirrer rod───[医]搅拌棒
4、gravitational pull───万有引力
5、pull───n.(Pull)人名；(法)皮尔；(德、瑞典)普尔；vt.拉；拔；拖；vi.拉，拖；拔；n.拉，拉绳；拉力，牵引力；拖
6、pull pull───拉-拉
7、rod───n.棒；惩罚；枝条；权力；n.(Rod)人名；(英、法、德、捷、希)罗德；(ALa伯)鲁德；(老)罗
8、pull along───沿…拉
9、ejector rod───顶出杆；推顶柱；抛壳钩杆; 顶坯杆; 出坯杆; 顶出杆
1、The cylinder is connected with the pull rod and one end of the pushing board in turn.───气缸与拉杆、推板的一端依次相接。其中推板的另一端伸到托盘左侧；
2、a supporting wheel matched with a climb railway is fixed on an inner vertical pull rod.───与爬升轨道配合的支撑轮固定在内侧垂直拉杆上。
3、One end of the rotation axle is connected with an electromagnet by a pull rod and a weight rod.───转动轴的一端通过拉杆和重锤杆与电磁铁相连。
4、The tail part of the sliding rail is fixed on the handle back seat. The base part of the pull rod is fixed on the handle front seat.───拉杆的基部固定在手柄前座上，导向杆的基部固定在滑轨基座上；
5、Where does Shenzhen have selling pull rod box box cover's?───深圳哪里有卖拉杆箱的箱套的？
6、Each pull rod has an inner upper rod and an outer lower rod therein.───每个拉杆上有一个内在的和外部杆低杆内。
7、The pull rod is screwed into the inside thread of the anchor head.───这是钻杆丝扣油，不能用在钻铤丝扣上。
8、and the joint of the pull rod part of the ball head tie rod and the OBJ ball pin sleeve is fixed via nuts at the outside.───在球头横拉杆的拉杆部分与OBJ球销套的连接处外用螺母进行加固。
9、A multi-step positioning device of a trunk pull rod has a pair of pull rods at two sides thereof.───一个多步骤的主干拉杆定位装置有拉，双方对其中棒。
1、Aileron servo pull rod should be vertical to the shaft of aileron basically.
2、The connections between trash rack and hoist as well as between service gate and hoist are achieved by hoisting chain that is apt to place and is time saving without tearing down pull rod.
3、The utility model relates to an electromagnet, which is composed of a yoke iron, an armature iron, a push rod, a pull rod, a starting coil, a sustain coil, a controlling circuit and an end cover.
4、Pull rod is the main bearing part of compact rolling mill and usually occurred abruption accidents.
5、These are safety screw and safety switch installed on the double pull rod.
6、The ballute consists of a ballute cover and ropes, and the ropes are respectively connected with the sliding axle in the chute and the pull rod in the semicircular arc-shaped pull rod bracket.