大家都搜：
静曲
静力弯曲
1、write static───静态写入
2、bending───n.弯曲，弯曲度；v.弯曲（bend的现在分词）
3、static electricity───n.[电磁]静电；静位觉；n.静位觉
4、bending moment───[力]弯矩；[力]弯曲力矩；[力]挠矩；弯（曲）矩，挠矩
5、flexural bending───塑性弯曲
6、anticlastic bending───抗塑性弯曲
7、bending over───俯身；折转
8、static discharge───静电放电
9、flatwise bending───平面弯曲
1、The mould feature and technology process of sheet metal bending were analyzed by static bending forming and dynamic bending forming.───从两个方面即静态弯曲成型，动态弯曲成型对弯曲成型板金零件的模具成型特点及其成型工艺过程进行了XiTong分析。
2、Analysis on static bending of thick rectangular plate on double-parameter elastic foundation───双参数弹性地基上中厚矩形筏板的静力分析
3、wood . static bending . determination of modulus of elasticity in static bending using small clear specimens.───木材。静力抗弯强度。用无瑕疵小试件测定静力抗弯强度试验中的弹性模量。
4、PAPER AND BOARD TESTS. METHOD TO DETERMINE THE STIFFNESS OF PAPER AND BOARD BY STATIC BENDING.───纸张和纸板试验.纸张和纸板静态弯曲挺度测定方法
5、The results indicate that the oxido- decarbonisation on the surface makes the static bending yield strength decrease by 15%.───结果表明，表面层的氧化脱碳使静弯屈服强度降低15%左右；
6、Five specimens for three-point static bending tests, five for thickness swelling (ts) were cut from each board according to ASTM D1037-96.───五件样品为三个点的静电弯曲测试，五因为厚度增大(TS)从依照美国材料试验学会D 1037 - 96的每董事会被减低。
7、Static bending strength and thickness swelling tests were carried out to examine the properties of these boards.───为了瞭解复台板之性质，进行静曲强度与厚度膨胀率等试验。
8、proper quantity of water selected may increase the static bending strength and decrease the transfiguration of plates.───选择合适的水分可以提高板材静弯曲强度，减小板材变形。
1、With the increase of wood fiber length, the static bending strength of products increases and the internal bond strength decreases.
2、In most factories the tests of physical and mechanical properties of plastic pirns are limited merely to the impact value and the static bending load.