大家都搜：
断路位置
1、upright position───正浮位置；直坐式；垂直位置[状态]
2、position───v.安置；把……放在适当位置；n.位置；姿态；处境，地位；观点；职位，工作；站位
3、change position───交换位置
4、gesture position───手势姿势
5、missionary position───n.传教士式TiWei，男上女下式TiWei；传教士式TiWei (Xing Jiao)
6、adjourned position───封棋局面
7、lotus position───n.（佛教）莲花坐（一种盘腿坐姿）
8、funic position───funic位置
9、position absolute───绝对位置
1、If Emergency Stop Switch is turned to Off position, all solenoids de-energize returning all valves to fail-safe condition.───如果紧急停车开关切换至关闭位置，所有的电磁阀都将失电，把所有阀门返回到故障安全状态。
2、There is no off position on the genius switch.───天才的开关上没有关闭这一位置。
3、Note: When not in use when the instrument, Proposed to instrument the power button toggle to the off position to conserve battery power.───备注：不使用对刀器的时候，建议将对刀器电源按钮拨动到关的位置，以节约电池用电。
4、By analyzing the ray's out off position of the cylinder system, the shape and size of the slot are determined.───通过对光束出射位置的分析，确定了光线出射槽的位置和形状尺寸。
5、both material shut-off valves, must be turned to their "off" position and all fluid pressure relieved before removing side block screws! !───在拆卸一边锁止螺钉前，两个物料切断阀必须调到“关闭”位置，并且释放所有液体压力！！
6、At this time, we ask that you please put away all electronic devices and place all cellular phones in the off position.───在这一刻，请您不要使用任何电器，并且关闭手机。
7、off position does not imply an all-pole disconnection.───断开位置并不意味着全极断开。
8、We were playing for a play-off position and I played nine straight games.───我们为附加赛席位而努力踢球，而我也踢了连续9场比赛。
9、Some DPDT switches have a central off position.───有些DPDT开关有一个中央关闭位置。
1、Ensure that the circuit - breaker is in the OFF position ( or off ).
2、Some DPDT switches have a central off position.
3、Limited service controller on-offswitch must be in the extreme offposition to open the enclosure door.
4、Reaching to the control panel, he flipped the auto-pilot to the off position.
5、Some SPDT switches have a central off position and are described as'on - off - on '.
6、TURN IGNITION FROM THE OFF POSITION TO THE ON ( RUN ) POSITION.
7、If Emergency Stop Switch is turned to Off position, all solenoids de-energize returning all valves to fail-safe condition.
8、Turn the ignition switch to the OFF position to exit disable mode.
9、Power resume and the embroidery can at cut off position.