大家都搜：
加压填充法
1、pressure───vt.迫使；密封；使……增压；n.压力；压迫，[物]压强
2、packing date───包装日期
3、customary packing───[包装]习惯包装
4、packing density───组装密度，存储密度，记录密度；[电子]组装密度；[计]记录密度；[计]存储密度
5、packing───n.包装；填充物；v.包装；装满；压紧（pack的ing形式）
6、insufficiently packing───包装不足
7、packing fraction───聚集率；[核]敛集率
8、blister packing───气泡包装；起泡包装
9、packing label───包装标签
1、Influence of high-pressure packing sand-control transitional zone on the productivity of sanding well───高压充填防砂过渡带对产能影响研究
2、Study of high pressure packing sand control technology in low permeability reservoir───低渗油藏高压充填防砂技术研究
3、At last, the productivity predicting model of the high-pressure packing sand-control well with the transitional zone is established based on the fluid mechanics in porous medium.───最后，根据渗流力学原理建立了更加完善的高压充填防砂井产能预测模型。
4、Failure Analysis of the Super High Pressure Packing Set and Countermeasures───超高压填料组失效及其预防措施
5、molder must recognize the dangers of excessive fill speed, insufficient injection pressure, excessive melt temperature, and inadequate packing.───注塑工必须认识过快填充速度、不足注塑压力、过高融化温度和不充分挤压的危害性。
6、Research and field application of high-pressure packing technique───高压充填工艺技术研究及矿场应用
7、The designer may lower the pressure on the packing by placing a throat bushing in the pump case (Figure).───设计者可在泵壳内放置喉道补心以降低在填料上的压力(图)。
8、Magnetic Seal Improvement on Low-pressure Packing Seal───用磁力机械密封改造低压填料密封
9、Mold temperature, melt temperature, packing pressure, packing pressure time and cooling time are considered as process parameters.───模子的温度，金属温度，填料的压力，填料的加压时间及冷却时间被考虑作为过程参数。