大家都搜：
管体
1、body body───身体
2、body───n.(Body)人名；(英、法、罗)博迪；vt.赋以形体；n.身体；主体；大量；团体；主要部分
3、pipe dream───白日梦，空想；n.白日梦，幻想
4、steel pipe───[材]钢管
5、pipe───vt.用管道输送；尖声唱；用管乐器演奏；n.(Pipe)人名；(匈)皮佩；(英)派普；n.管；烟斗；笛；vi.吹笛；尖叫
6、pipe stem───管柱
7、ferruled pipe───套圈管
8、main pipe───总管；主管道；[机] 总管; 主管道
9、tail pipe───n.排气尾管
1、In viewing the detection missing of holes in pipe body in the detection of defects at present a kind of remedy measures are put forth.───针对目前钢管探伤中管体孔洞漏检问题提出了一种补救措施。
2、the resin can be stirred and mixed by rotating the swallowtail-shaped mixing board on the top of the pipe body.───转动管体其顶部的燕尾状搅拌板即可搅拌树脂使之混合。
3、API regulates that the yield strength of flatten specimen from pipe body is used to characterized the yield strength of oil pipeline body.───根据美国石油学会API标准规定，采用管体取样压平试样的屈服强度表征输油管体屈服强度。
4、It was measured by using flattened plate sample generally, so in fact it is not the true yield strength of the pipe body.───通常采用压平的板状试样来测定钢管的屈服强度，所测屈服强度并非钢管的真实屈服强度。
5、Notethe coating thickness of weld seam should be not less than 80% of coating thickness on pipe body.───焊缝处的防腐层厚度，不得低于管本体防腐层规定厚度的80%。
6、The front end edge portion 4 is formed by inwardly pressing and deforming the front end portion of the pipe body 2.───前端边缘部分四是由内心冲压变形的管身前端部分2。
7、The spray pipe is a ring hollow pipe body, and the through spray orifices are alternatively distributed around the spray pipe.───所说的喷管为环形中空管体，贯通的喷孔沿喷管的圆周间隔分布。
8、the sealing ring is embedded into the tube coupling to prevent the screw threads of the pipe body and the coupling from being eroded.───管接箍内嵌入密封环可防止管体螺纹和接箍的腐蚀；
9、tensile strength(UTS) both in transverse and longitudinal of pipe body showed the trend for rising.───纵向的屈服强度及其屈强比均有上升趋势； 钢管母材横向和纵向抗拉强度都呈上升趋势。
1、The front end edge portion 4 is formed by inwardly pressing and deforming the front end portion of the pipe body 2.
2、The ultimate tensile strength(UTS) both in transverse and longitudinal of pipe body showed the trend for rising.