大家都搜：
压簧，[机]压力弹簧
1、hydraulic pressure───液压；水压；n.水压; 液压
2、spring───vi.生长；涌出，涌现；跃出；（尤指木料）翘曲、裂开；辩护；发源于；惊现；付账（尤指请客）；；vt.使跳起；使爆炸；使弹开；突然向某人提供（或提出）；花钱；突然发现、撞见（不正当活动或违法者）；突然运转；使（犯人）获释（或逃跑）；解救；惊起（猎鸟），使（猎鸟）从躲藏处飞出；（船的桅杆或其他部分）翘曲，裂开；n. (Spring)（美、瑞、英、加、德）斯普林（人名）；n.春天；弹簧；泉水；活力；跳跃；adj.春天的
3、hydrostatic pressure───流体静压（力）；[流]液体静压力
4、ambient pressure───环境压力，周围压力；[流]环境压力；周围压力
5、peer pressure───同伴压力；来自同辈的压力；同辈压力; 同侪压力; 同龄人压力
6、downward pressure───向下压力；下向压力
7、external pressure───外部压力，外压，外压力
8、pressure───vt.迫使；密封；使……增压；n.压力；压迫，[物]压强
9、pressure from───来自于……的压力
1、seal handle is released, the pressure spring will reset and the driving counting ring driven by the driving board will rotate further.───松开印把时，压力弹簧复位，驱动板再次通过驱动滑槽推动主动记数环继续转动。
2、When the seal handle is pressed down, the pressure spring will be compressed, and the driving counting ring will be driven to rotate by the driving board.───压下印把时，压力弹簧被压缩，驱动板通过主动记数环上的驱动滑槽推动主动记数环转动。
3、the rectangular plates in each pair are connected with each other by a pressure spring.───每对矩形板之间通过压力弹簧相联接。
4、A concave groove is arranged outside the conical shell, the large-end end surface of the shell is provided with a pressure spring end cover.───圆锥形壳体外面设有一凹槽，壳体的大头端面设置有压簧端盖。
5、Check and found that the left and right feed roller pressure spring laying, the replacement of spring.───再查，发掘把握送纸滚轮压簧一长一短，调换弹簧。
6、Host : hypertension suspended roller mill process, Roller hanger on securing a high- pressure spring 1000-1500 kg .───工作过程：高压悬辊磨主机内，磨辊吊架上紧固有1000-1500公斤压力的高压弹簧。
7、and a pressure spring is sheathed outside the liquid-storage chamber.───压簧套装在储液腔室的外面。
8、Pressure spring machine is composed of main machine, control system, motor power unit, auxiliary device and auxiliary equipment.───压簧机械由主机，控制XiTong，电机动力单元，辅助装置，附属设备组成。
9、Three types of clutch are the coil-pressure-spring type, diaphragm-spring type, and semi centrifugal type.───离合器的三种类型为：螺旋弹簧式，膜片弹簧式和半离心式。
1、The water heating control valve is composed of a valve casing, a valve outer cover, an inner cover, a pressure spring, a valve core, a positioning device and a sealing ring.
2、The cutting straw is pressed to the baffle by the star wheel again. Under the action of the feeding gear and the pressure spring, the erect straws make the motion of transverse feeding.
3、A pressure regulation screw bolt can be arranged on the pressure spring, and the pedals can also be installed on the lateral part of the casing.
4、When the seal handle is pressed down, the pressure spring will be compressed, and the driving counting ring will be driven to rotate by the driving board.
5、After the seal handle is released, the pressure spring will reset and the driving counting ring driven by the driving board will rotate further.