大家都搜：
割线模量；正割模数；本构模型
1、secant means───割线法
2、elastic modulus───弹性模数，弹性组件，弹性计量单位；弹性系数；弹性模数
3、flexural modulus───挠[弯]曲模量；[力]弯曲模量；[力]挠曲模量
4、modulus───n.系数；模数
5、secant line───[数]割线
6、fineness modulus───（集料）细度模量；细度模量，细度系数
7、tensile modulus───[力]拉伸模量；定伸强度；抗张模量
8、secant definition───割线定义
9、secant calculator───割线计算器
1、The detailed comparison shown that secant modulus ratio isn't constant, this phenomenon is exist even though at the quasi-elastic deformation phase.───详细的比较表明，在不同的变形阶段，两者割线模量之比并非常数，即使是在准弹性变形阶段，也存在这一现象。
2、Study on some problems of settlement calculation with secant modulus method and its modification───割线模量法在沉降计算中存在的问题及改进探讨
3、puts out the formulas used to calculate displacement by secant modulus, which think about the influence on lateral displacement.───提出了饱和粘土利用割线模量法计算固结沉降，且考虑侧向变形影响的公式。
4、tangential modulus and secant modulus are exponential with axial strain.───切线模量和割线模量均与轴向应变呈指数相关性。
5、The secant modulus of soil is usually larger than the tangent one, but the value of differences decreases with the increasing strain.───土体割线模量值大于切线模量值，其差值随应变的增加逐渐减小；
6、So the secant modulus from zero stress can not describe the deformation property of the practical rock mass.───因此，从原点计算的割线模量不能反映实际岩体的变形特征。
7、Secant modulus method (SMM) is a new method to calculate foundation settlement in recent years.───割线模量法是近几年获得青睐的计算地基沉降的新方法。
8、Both the tangential modulus and secant modulus are exponential with axial strain.───松散岩块的切线模量和割线模量均与轴向应变呈指数相关性。
9、The secant modulus is linear with axial stress.───而其割线模量与轴向应力则呈线性关系；
1、The results show that fatigue failure criterion of concrete under tensile-compressive stress can be indicated by ultimate attenuation rate of secant modulus.
2、Static secant modulus of rigidity is determined from the torque-twist curve of torsional test.