大家都搜：
电化学腐蚀
1、callot etching───卡洛特腐蚀
2、electrochemical cell───[电]电化电池
3、electro-etching───电腐蚀（electroetch的现在分词）
4、etching solution───蚀刻剂；蚀刻溶液
5、plowman etching───犁铧蚀刻
6、etching───adj.蚀刻的；v.蚀刻；刻画（etch的ing形式）；n.蚀刻术；蚀刻版画
7、electrolytically etching───电解腐蚀
8、etching primer───腐蚀性涂料；[化] 防护涂料; 磷化底漆; 洗涤底漆; 反应性底漆
9、etching gel───蚀刻胶
1、Based on electrochemical etching principles, the paper fabricated the micrometer scale wire electrodes used in WEMM.───本文基于电化学腐蚀原理，制备微细电化学线切割加工中使用的微米尺度线电极。
2、New developments on electrochemical etching processes at the Atomic Energy organization of Iran.───YiLangYuanZiNengJiGou电化学蚀刻技术的新发展…[中国核科技信息与经济研究院]。
3、The fabrication of alloy microelectrodes by electrochemical-etching method is presented.───采用电化学刻蚀法制备了合金微电极。
4、Double-cell electrochemical etching is used to prepare PS based on p+ type silicon.───以p+型硅片为基底，通过双槽电化学腐蚀法制备多孔硅。
5、the third chapter Porous silicon was prepared by pulsed and dc electrochemical etching methods under the equivalent etching condition.───第三章研究了用脉冲电化学腐蚀制备均匀发光多孔硅。
6、Preparation of Uniformly Luminescence Porous Silicon by Pulsed Electrochemical Etching Method───电化学脉冲腐蚀制备均匀发光多孔硅
7、Firstly, PSMs were prepared by the pulsed electrochemical etching method and the experimental conditions were optimized.───用电化学脉冲腐蚀法制备多孔硅微腔，优化了实验参数。
8、PSMs were prepared by the pulsed electrochemical etching method and the experimental conditions were optimized.───用电化学脉冲腐蚀法制备多孔硅微腔，优化了实验参数。
1、Firstly, PSMs were prepared by the pulsed electrochemical etching method and the experimental conditions were optimized.
2、Tungsten STM tips made by electrochemical etching are always covered with a layer of oxide film, which greatly affects the quality of STM images.
3、P-type Silicon crystal plates have been adopted in the paper. Then the electrochemical etching experiments are done in three electrodes electrobath .
4、With the orthogonal experiment, porous silicon(PS) was fabricated by galvanostatic electrochemical etching method.
5、We propose to machine cylindrical micro-pins using the electrochemical etching method to control their shape and dimension.
6、The electrochemical etching technique of PN junction etch-stop in alkaline solution KOH is one of foundational methods of fabricating three-dimension silicon microstructures.
7、Porous silicon (PS) was prepared by the electrochemical etching technique with self-made cell. The orthogonal experimental method is adopted to design anodization parameters.