大家都搜：
老化温度
1、aging process───老化法；老化过程
2、temperature───n.温度；体温；气温；发烧
3、aging population───老年人口；老化人口
4、aging cell───老化细胞
5、aging───n.老化；陈化，熟化
6、aging society───n.老龄化社会
7、alloy aging───合金时效
8、accepting aging───接受老化
9、progressively aging───逐渐老化
1、The cooling velocity of fast cooling section and over aging temperature have no significant effect on bake hardening property.───快冷段冷速和过时效温度对烘烤硬化性能均无明显影响；
2、cold rolling and aging temperature are the major factors that influence the interaction.───冷变形量及时效温度是影响交互作用的主要因素。
3、The effect of aging temperature and aging time to new-type heat-resisting aluminum alloy forging structure and properties are introduced .───通过对新型铝合金时效处理后的组织结构进行分析，研究了不同的时效温度和时间对该铝合金力学性能的影响。
4、However, with the increase of aging temperature, the hardness gradually increases, while reaching a maximum value then begins to decrease.───在相同时效时间条件下，随时效温度的升高，硬度逐渐增高，达极大值之后又降低。
5、effects of aging temperature on microstructure and properties of K487 alloy have been investigated.───研究了不同时效温度对K487合金组织和性能的影响。
6、Further increase of aging temperature and time could lead to the growth of the secondary phase and thus decrease of microhardness.───继续升高时效温度或延长时效时间会引起第二相长大而导致显微硬度的升降。
7、With the increase of aging temperature, the tensile strength decreases. With the increase of elongation.───随着时效温度的升高，合金的拉伸强度降低，而延伸率则不断增加。
8、When the aging temperature the same, as the aging time, the catalyst for the conversion and reduced choice.───当老化温度相同时，随着老化时间的增加，催化剂的转化率和选择减小。
9、While, the saturation magnetization decreases slightly with increasing aging temperature.───而饱和磁化强度随时效温度的升高而略有下降。
1、In addition, some phenomena frequently appeared in the practices, such as bald spots, aging, temperature and others of the lawn of tall fescue grass, were explained and analyzed.
2、The results show that the residual resistance ration relates not only to the aging temperature and the impurity concentration of the metal, but also to the aging time.
3、In contrary to rigor mortis, tenderization was promoted by increasing of aging temperature.
4、The aluminum alloy casting can be rapidly cooled from the solutionizing temperature directly to the aging temperature, eliminating the room temperature hold of a conventional process.
5、The optical aging temperature of AZ 80 alloy is 170 ℃.
6、The cooling velocity of fast cooling section and over aging temperature have no significant effect on bake hardening property.