大家都搜：
[机][试验]磨耗试验机
1、keyboard tester───键盘测试仪
2、tester───n.(Tester)人名；(英)特斯特；n.天盖；检验器；试验员
3、roughness tester───粗糙度测试仪
4、hardness tester───硬度试验机；硬度测定仪
5、abrasion resistant───耐磨性，耐磨的
6、hydrometer tester───比重计测试仪
7、corneal abrasion───角膜擦伤
8、abrasion───n.磨损；磨耗；擦伤
9、voltage tester───电压检测器
1、Fourth, set test plan and the MLS - 225 type wet sand rubber wheel abrasion tester to wear experiment;───第四，拟定试验方案，在MLS-225型湿沙橡胶轮磨损试验机上进行磨料磨损试验；
2、three different impact energy, LCHA with Mn in place of Ni were tested with a modified MLD-10 wear tester to investigate their behavior of corrosive impact abrasion.───在改进的MLD - 10型冲击腐蚀磨损试验机上，选择三种不同的冲击功，对以锰代镍的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
3、wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.───TE66试验机对新型TAMZ钛合金的微磨粒磨损行为进行了研究。
4、Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)───纺织品耐磨性的试验方法（马丁代尔磨擦试验仪法）
5、Research on the Sand Slurry Abrasion Tester with Vertical Multi-clamps───多头立式泥沙磨损试验机试验研究
6、Study on abrasion resistance and wet traction of tire tread by abrasion tester───用室内磨耗试验机研究胎面胶的耐磨性和抗湿滑性
7、Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)───纺织品耐磨性的标准试验方法（马丁代尔磨擦试验仪法）
8、abrasion resistance and wet traction of NR, SBR and BR vulcanizates with different carbon blacks respectively were investigated by LAT100 abrasion tester.───磨耗试验机LAT100研究含NR、SBR、BR及不同品种炭黑胎面胶的耐磨性和抗湿滑性。
9、Wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by SEM.───在磨损试验机上对其耐磨性进行测试，同时利用扫描电镜对试样的磨损形貌进行观察分析。
1、According to the analysis of the performance of antifriction by using abrasion tester, coefficient of friction and wear loss were measured on the conditions of regular feeding oil and no oil.
2、The effect of varying mates on abrasive wear character of martensitic wear-resistant steel by MLD-10 type impact abrasion tester was investigated.
3、The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.
4、Adhesion test using cellophane tape and abrasion test using Tabore Abrasion Tester in the quality control of curtain wall glass are also discussed.
5、Friction and wear behaviors were studied between the untreated base material and the friction stir welds of LF2 aluminum alloy on MM-200 abrasion tester.
6、Wear tests of 45 steel, as standard sample, and D8, D9 wear - resisting surfacing materials were carried out by sand slurry abrasion tester with vertical multi - clamps under concrete condition.
7、For material plastic, rubber, plywood, glass, painting, textile...etc, this abrasion tester provides a wide range test through different grinding wheel.
8、Wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by SEM.
9、The abrasion resistance and wet traction of NR, SBR and BR vulcanizates with different carbon blacks respectively were investigated by LAT100 abrasion tester.