大家都搜：
击种器；排出器；推种器
1、ejector hvac───PenShe器hvac
2、ejector───n.[机]PenShe器；驱逐者；推出器；排出器
3、ejector pin───出坯杆; 起模杆; 推出机杆; 推顶杆；出坯杆，起模杆；推顶杆，推钉
4、plate───n.碟；金属板；金属牌；感光底片；vt.电镀；给…装甲；n.(Plate)人名；(英、德、俄、西、意、瑞典)普拉特
5、ejector rod───顶出杆；推顶柱；抛壳钩杆; 顶坯杆; 出坯杆; 顶出杆
6、ejector definition───PenShe器定义
7、ejector pins───出坯杆，起模杆；推顶杆，推钉
8、hogging ejector───快速启动空气PenShe点
9、tie plate───系板；连接板；钢轨垫板
1、Next is actuation of the ejector plate.───其次是顶料板的顶出。
2、The mould plate and ejector grid system is shown in chain-dotted lines in the cross-sectional view.───模板和顶料格架XiTong在剖面图上以点划线表示。
3、Design of the Multi-Position Progressive Die for the Recording Ejector Plate───录音推板多工位级进模设计
4、Die-cast die components--Guide bushings for ejector plate───压铸模零件推板导套
5、ejector plate guide pins of moulds for plastics───塑料铸模起模板导销
6、The ejector plate assembly's movement effectively withdraws the central mandrel from the collapsible sleeve, thereby causing it to contract in diameter.───顶出板组件的运动有力地把实体新棒从环形套管拉出，因此使环形套管在直径上收缩。
7、Through analyzing moulding technology of the toolbox, designed a injection mold with straight gate injection system, ejector rod and stripper plate united ejection mechanism.───通过对工具箱的塑件工艺分析，确定了直浇口浇注XiTong、推杆、顶板联合顶出的模具结构。
8、Universal Ejector Plate Used in Piston Manufacture───活塞加工中一种万向顶盘
9、Die Spring Ejector Plate Safety───顶针板弹簧使用是否安全
1、The issue that high hot and high speed wake had affect on the ejector plate and protection-piston of the launch vehicle was also investigated.
2、The ejector grid is that part of the mould which supports the mould plate and provides a space into which the ejector plate assembly can be fitted and operated.
3、Next is actuation of the ejector plate.
4、The ejector plate assembly's movement effectively withdraws the central mandrel from the collapsible sleeve thereby causing it to contract in diameter.
5、The shedder is suitable for drafting bottles of different specifications through changing draft ejector plate and adjusting the original position of the plate.
6、However, certain types of component necessitate the use of pin, sleeve or bar ejection, in which case a conventional ejector plate assembly must be incorporated.